PINTYPLUS TECH - HIGH TEMPERATURE PAINT
This paint has been specifically designed for use on products and surfaces that are exposed to high temperatures.
The colours withstand temperatures of up to 600ºC.
Applications:
Ideal for use on surfaces liable to withstand high temperatures such as:-
Exhaust pipes
Heaters
Radiators
Stoves
Barbecues
Technical characteristics:
Spreading: 200ml = 1 m2. 400ml = 2 m2
Dry: Surface dry in 30 minutes, total drying time is 1 hour (at 20 degrees C).
Repaint: After 30 minutes
How to apply:
1. Ensure the surface is clean, dry, and free of any contaminants before application. Shake the can vigorously for 1 minute.
2. Spray from a distance of 25-30 cm, applying thin and quick layers, first horizontally and then vertically. It is advisable to spray two thin layers instead of one thick layer in order to obtain uniform coverage and avoid paint runs.
3. Once the operation is complete, reverse the can and push the nozzle until only gas comes out in order to avoid blockage of the nozzle.
Do not use on devices connected to the power grid and apply in ventilated areas.
Tips:
If used on painted surfaces that are well adhered, lightly sand before applying. If the paint is flaking or bubbled, remove it before applying. We recommend using the Greenox paint stripper.
This paint has been specifically designed for use on products and surfaces that are exposed to high temperatures.
The colours withstand temperatures of up to 600ºC.
Applications:
Ideal for use on surfaces liable to withstand high temperatures such as:-
Exhaust pipes
Heaters
Radiators
Stoves
Barbecues
Technical characteristics:
Spreading: 200ml = 1 m2. 400ml = 2 m2
Dry: Surface dry in 30 minutes, total drying time is 1 hour (at 20 degrees C).
Repaint: After 30 minutes
How to apply:
1. Ensure the surface is clean, dry, and free of any contaminants before application. Shake the can vigorously for 1 minute.
2. Spray from a distance of 25-30 cm, applying thin and quick layers, first horizontally and then vertically. It is advisable to spray two thin layers instead of one thick layer in order to obtain uniform coverage and avoid paint runs.
3. Once the operation is complete, reverse the can and push the nozzle until only gas comes out in order to avoid blockage of the nozzle.
Do not use on devices connected to the power grid and apply in ventilated areas.
Tips:
If used on painted surfaces that are well adhered, lightly sand before applying. If the paint is flaking or bubbled, remove it before applying. We recommend using the Greenox paint stripper.
